Product details of the mobile solar power trailer
Product Introduction
It is true that a fantastic design is a boon to the popularity of mobile solar power trailer. In our strict quality assurance procedures, any defects of the products have been avoided or eliminated. The excellent characteristics give the product greater market application potential.
LED lights with mobile solar trailer specification:
Base System
Name:Solar Light Tower
Model: HL4604G-9H-1006
Material:Steel Q235
Powder:Outdoor Type
Dimension:Length×Width×Height
2600×2275×2400 (mm) Transport
3800×6475×9250 (mm) Operate
Weight:2100kg / 4630lb
System Voltage:DC48V
Work Temperature:-35℃~60℃ / -31℉~140℉
Solar System
Solar Panel:4 × 460W Monocrystalline Silicon 72pcs
Battery System
Battery GEL:8 × 200Ah Free-main Deep-cycle Electric Fan
Voltage:DC12V
Series & Parallel:4 in series, then parallel
Power Capacity:19200W·h
Light System
LED:6 × 100W Module Outdoor Type
Protection Class:IP65
Lumens:90000Lm
Beam angle:20° 40° 60° 90° 110°
Voltage:DC48V
Control System
Solar Controller: MPPT
Efficiency:95%+
Detection & Protection:
Short-Circuit
Overload
High Voltage
High Temperature
Timer:Dusk & Dawn
Whole Machine:
Battery Isolator
Each Light on-off
Light up-down
Mast up-down
Mast System
Body:Steel Q235 Hot Dip Galvanized
Type:Square Telescopic
Height:9m / 30ft
Section:9
Rotation:Horizontal 360° Manual Vertical 90° Electric
Spring Cable:Power Supply
Lifting Method:Hydraulic
Recommended Loading:5kg ~ 100kg / 11lb ~ 220lb
Windproof:118km/h / 73mph
Trailer System
Standard:US / AU / EU
Tow Hitch:50mm / 2'' Ball Type
Trailer Light:7 Pin
Axle:Single Suspension Bump Brake
Wheel Chock:2
Forklift Hole:2
Outrigger:4 × Manual Galvanized
Warranty:2 years
LED lights with mobile solar trailer photo for reference.
Knowledge News
What Matters Should Be Paid Attention To In The Daily Maintenance Of Solar Monitoring Cameras?
Check and maintain battery (group) and photovoltaic controller and inverter
Check and maintain batteries
(1) Keep the battery room clean to prevent dust from entering; Keep the room dry and well ventilated and well lit, but should not direct sunlight onto the battery.
(2) Indoor fireworks are strictly prohibited, especially when the battery is in charging state.
(3) When maintaining batteries, maintenance personnel should wear protective glasses, body protective equipment, and use insulation devices to prevent personnel from damaging batteries electric shock to prevent battery short circuit and circuit break.
(4) Often carry out the normal inspection of the battery.
(5) When using the battery normally, please do not use any organic solvent to clean the battery, and do not remove the battery for safety valve or in the battery to add any substance, battery discharge should be charged as soon as possible, so as not to affect the capacity of the battery.
Inspection and maintenance of pv controller and inverter
(1)The operation and use of photovoltaic controller and inverter should be carried out in strict accordance with the requirements and provisions of the operation manual. Check whether the input voltage is normal before starting; When operating, we should pay attention to whether the order of the switch is correct, and whether the indicator light and the head of the table are normal.
(2)Controller and inverter in the occurrence of open, over current, over voltage, overheating and other faults, generally will enter the automatic protection state and stop working. Once these equipment is down, do not turn on immediately, to find out the cause and repair the power again.
(3)When there is high pressure in the inverter chassis or cabinet, operators should not open the chassis or cabinet, and the cabinet door should be locked at ordinary times. When the ambient temperature exceeds 30 ° C, take cooling and heat dissipation measures to prevent device faults and prolong device service life. Check the temperature, sound and smell inside the machine regularly.
(4)Maintenance and overhaul of controllers and inverters: Strictly check whether the cables of controllers and inverters are loose (such as fuses, fans, power modules, input and output terminals, and grounding), and immediately repair the loose cables.
BIGLUX develops and implements the most energy saving and convenient mobile solar energy products over ten years, Our products mainly include mobile solar power tower fully featured with lighting tower, CCTV security trailer, telecom tower and power charging trailer.
If you are interested LED lights with mobile solar trailer, please feel free to contact us. Or click here to have direct access to our website at www.bigluxled.com to get the right solution.
Company Advantage
• The products of BIGLUX Mobile Solar Power have been sold in major domestic markets. Besides, they are exported to br /> • Founded in our company has been continuously developed in the years. With strong management, technology and service strength, we have successfully entered the leading position in the industry.
• BIGLUX Mobile Solar Power is committed to providing quality products and services for customers. We have a talents team with rich experience and mature technology. The team members focus on innovation and excellence.
• Our company has established a perfect pre-sales and after-sales service system. As a result, we can effectively protect the consumers' rights and interests and provide quality products and services for consumers.
Hello, thanks for your support and attention to BIGLUX Mobile Solar Power! If you are interested in our medicine or services, please call our hotline. We are looking forward to working with you!
Limited stocked product, first come, first served
Whatsapp: +86 188 1878 5601
Hot line1: +86 199 2655 3189
Hot line2: +86 188 1878 5601
Email: info@bigluxpower.com
Head Office: #1002 West Tower, LaoBing Building, No. 3012 XingYe Rd, BaoAn, ShenZhen, China